How to Manually Place Counters and Assemblies (2:54)

Step 1: Initialization and Setup

1. Open the Inspire software and navigate to the module for placing counters and assemblies.
2. Select the default counter tool and prepare to apply it to designated symbols on your floor plan.

Step 2: Placing Counters and Labeling

1. Begin by placing counters over each light fixture or relevant symbol on your drawing.
2. Immediately label each counter with the appropriate identifier for the fixture or component it represents.
3. Continue this process across the entire plan, ensuring each symbol is accurately marked.

Step 3: Embedding Detailed Information

1. For power assemblies, input detailed specifications such as height and circuit information at the time of placement.
2. Adjust settings directly in the tool to apply different types of counters or modify existing ones without switching tools.

Step 4: Saving and Finalizing Data

1. Once all counters and assemblies are correctly placed and labeled, right click and press the 'save' button to finalize the entries.
2. Verify that all data is accurately reflected in the Quantities tab and that each assembly contains correct and complete information.

Step 5: Review and Adjustments

1. Review all tagged and labeled assemblies to ensure everything is correctly entered.
2. Make any necessary adjustments to the properties of the assemblies to reflect accurate installation details or circuit information.
3. Confirm that all changes are saved and that the final data integrity is maintained within the project documentation.